How Should Pneumatic Roofbolters Be Cleaned After Use?
Jun 27, 2025| 1. Turn off the air and water sources
After the operation is completed, turn off the air source of the outriggers first, and use the weight of the machine and manual assistance to smoothly push the drill rod out of the hole.
Stop the motor and turn off the water valve.
2. Clean the drill rig
Rinse the surface of the drill rig with water to remove dust and gravel.
Idle the drill rig for a while to remove moisture from the surface of the machine to prevent rust.
3. Check the equipment
Check the various fastening screws of the machine to see if they are loose. If they are loose, they need to be handled in time.
Check the oil level in the oil cup to ensure that the oil level is sufficient to meet the needs of the next use.
4. Storing equipment
Place the drill rig vertically in a safe place to avoid accidental damage such as blasting, machine rolling, and vehicle rolling.
5. Regular maintenance
After multiple cycles of operation, if it is necessary to stop the machine for a long time, some parts of the machine can be disassembled, vulnerable parts can be replaced, and anti-rust treatment can be performed.
6. Clean up the site
Clean up the work site to ensure that the site is clean.
