Safety Precautions For Operating Pneumatic Air Leg Rock Drill

1. Operator cooperation: Two people should operate the rock drill, one person is responsible for operating the rock drill, and the other is responsible for operating the air valve and water valve.
2. Safety distance: No one is allowed in front of the rock drill. After receiving the drill, you must retreat to a safe place behind the drilling rig in time.
3. Monitor equipment parameters: During operation, the working pressure of the hydraulic system should be closely monitored to prevent it from exceeding the rated working pressure of the machine.
4. Abnormal sound handling: If there is an abnormal sound during operation, the operation should be stopped immediately for inspection; after confirming that there are no dangerous factors, the operation can be carried out again.
5. It is strictly forbidden to replace the oil pump at will: It is strictly forbidden to replace the oil pump equipped with this equipment at will.
6. Prevent the steel strand from breaking: During operation, other equipment such as single hydraulic props should be used to lift the top plate to reduce the pressure of the top plate and assist the machine to withdraw the anchor to prevent the steel strand from breaking and causing the top plate to collapse.
7. Precautions for initial operation: In the initial operation, water should be turned on first and then air.
8. Precautions during the operation: During the operation, pay attention to the sound of the rock drill, observe its operation, and immediately stop the machine to deal with any problems.
9. Precautions after drilling: After drilling, cut off the water source and run it gently for a while to blow away the remaining water droplets in the machine to prevent rust on the parts.