News

Nov 05, 2025

The 21st China International Coal Mining Technology Exchange And Equipment Ex...
Exhibition Dates: October 28-31, 2025 Booth Number: E2423 Exhibiting Company: Hiscore Machinery Technology Co., Ltd. Location: China International Exhibition Center (Shunyi Hall), Capital Internati...
Nov 19, 2025

How To Properly Operate Anchor Line Shears?
1. Equipment Inspection and Preparation Hydraulic System: Check the hydraulic oil pump oil level and the sealing of the oil pipe connections to ensure there are no leaks. Cutter Condition: Confirm ...
Nov 17, 2025

What Are The Maintenance Steps For The Pneumatic Anchor Cable Releaser?
1. Daily Cleaning and Inspection After each use, clean coal dust and oil stains from the equipment surface to prevent impurities from entering the hydraulic system. Check the oil pipes and joints f...
Nov 14, 2025

What Is The Regular Maintenance Schedule For The Pneumatic Anchor Cable Relea...
Pneumatic Anchor Cable Releaser Regular Maintenance Schedule 1. Daily Maintenance After each use, clean the equipment surface of oil and coal dust, and check the oil pipe sealing and anchor head we...
Nov 12, 2025

How To Maintain And Service A Pneumatic Anchor Cable Releaser?
1. Daily Cleaning and Inspection After each use, clean coal dust and oil stains from the equipment surface to prevent impurities from entering the hydraulic system. Check the oil pipes and joints f...
Nov 10, 2025

How To Correctly Operate The Pneumatic Anchor Cable Releaser?
Pneumatic Anchor Cable Releaser Operating Procedure 1. Pre-operation check Check the hydraulic oil level, pipe connections, and seals to ensure there are no leaks. When using a manual pump, inject ...
Nov 07, 2025

How To Prevent Pneumatic Anchor Cable Tensioning Failures?
1. Hydraulic System Maintenance Oil Management: Use 32# or 46# hydraulic oil, replace every 250 hours, and avoid mixing different types of oil. Seal Inspection: Daily check the seals of oil pipes, ...
Nov 05, 2025

What Are Some Common Malfunctions Of Pneumatic Anchor Cable Tensioning Systems?
1. Abnormal Hydraulic System Pressure Sudden pressure drop or fluctuation: May be caused by solenoid valve failure, oil pipe blockage, or excessively viscous hydraulic oil. Pressure fails to rise: ...
Nov 03, 2025

How To Perform Regular Maintenance On Pneumatic Anchor Cable Tensioning Equip...
1. Daily Inspection and Maintenance Oil and Air Circuit Inspection: Before each shift, check the pneumatic pump oil level (32# or 46# hydraulic oil) and pipeline sealing. Leaks must be addressed im...
Oct 31, 2025

How To Correctly Use Pneumatic Anchor Cable Tensioning?
1. Directional Control Valve Operation and Pressure Holding The directional control valve has three positions: pushing (tensioning the anchor cable), pressure release (releasing pressure to 0), and...
Oct 29, 2025

Pneumatic Anchor Cable Tensioning: Core Functions And Operating Points
1. Pressure Testing and Pressure Holding Performance Before leaving the factory, the pressure holding performance of the gear pump must be tested. At a rated pressure of 60MPa, the pressure gauge m...
Oct 27, 2025

How To Determine If A Pneumatic Rib Drill Requires Maintenance?
1. Abnormal Noise or Vibration If the drill produces metallic friction sounds, knocking sounds, or abnormal vibrations during operation, it may indicate worn gearbox bearings or loose internal part...

First 123 4 5 6 Last 2/6