News

Jul 02, 2025

How To Prevent Air Leakage in Pneumatic Roofbolters?
1. Regular inspection and maintenance Check the air connection: Check the air connection regularly to ensure that there is no air leakage. If the joint is found to be loose, tighten it immediately....
Jun 30, 2025

How To Properly Maintain Pneumatic Roofbolters?
Daily maintenance 1. Check fasteners: Check all fasteners before and after work every day to see if they are loose. If they are loose, they must be tightened in time. 2. Check the flexibility of th...
Jun 27, 2025

How Should Pneumatic Roofbolters Be Cleaned After Use?
1. Turn off the air and water sources After the operation is completed, turn off the air source of the outriggers first, and use the weight of the machine and manual assistance to smoothly push the...
Jun 25, 2025

Precautions During The Operation Of Pneumatic Air Leg Rock Drill
1. Exhaust inspection: After the hydraulic oil system is connected, exhaust is a must. Place the hand pump slightly higher than the jack in use, move the reversing valve, shake the hand pressure ro...
Jun 23, 2025

How To Check The Air Pressure And Water Pressure Of Pneumatic Air Leg Rock Dr...
Check the air pressure 1. Check the air source pressure: Before use, you need to check the wind pressure at the work site. The wind pressure should be around the rated pressure of the rock drill, g...
Jun 21, 2025

Safety Precautions For Operating Pneumatic Air Leg Rock Drill
1. Operator cooperation: Two people should operate the rock drill, one person is responsible for operating the rock drill, and the other is responsible for operating the air valve and water valve. ...
Jun 19, 2025

What Safety Preparations Should Be Made Before Operating Anchor Line Shears?
1. Check the integrity of the equipment: Check whether all parts of the cutter are complete and intact, and ensure that there is no damage, looseness or abnormality. 2. Check the oil volume: Check ...
Jun 16, 2025

What Safety Precautions Should Be Taken When Using The Pneumatic Anchor Cable...
Preparation before operation 1. Check the integrity of the equipment: When replacing the jack tool anchor, screw the tool anchor jacket and the top pressure device to the bottom to prevent damage t...
Jun 12, 2025

Safety Operating Procedures For Pneumatic Anchor Cable Releaser
1. When replacing the jack tool anchor: screw the tool anchor jacket and the top pressure device to the bottom to prevent damage to the jack parts. 2. After the tool anchor is replaced: use a speci...
Jun 09, 2025

How To Operate Pneumatic Anchor Cable Tensioning Safely?
1. Inspection before operation 1. Equipment inspection: Before starting any operation, the operator must carefully inspect all parts of the anchor cable tensioning equipment. If any damage or malfu...
Jun 05, 2025

How To Maintain The Pneumatic Rib Drill To Extend Its Service Life?
Daily maintenance 1. Check fasteners: Check all fasteners before and after work every day to see if they are loose. If they are loose, they must be tightened in time. 2. Check the flexibility of th...
Jun 02, 2025

What Are The Inspection Steps Before Operating Pneumatic Roofbolters?
1. Check the integrity of the equipment: Check whether all parts of the Pneumatic Roofbolters are complete and intact, and whether the bolts are fixed reliably. 2. Check the air and water circuits:...

First 1 2 345 6 Last 4/6